Diesel Power Technology Program

Tool List

You will need the tools listed below to work on projects in the lab. If you do not already own tools, you are encouraged to wait and purchase them from a vendor at "Tool Day" early in the fall semester. At "Tool Day," you can purchase tools at significant discounts from Mac, Snap-on, and others.

                                                                                                                                                 
1/4" Drive Set includes:

  • 1 - 2" extension
  • 1 - 6" extension
  • 1 - Ratchet
  • 1 - Universal joint
  • 9 - Sockets (3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16" and 1/2")
  • 4 - Deep sockets (5/16", 3/8", 1/2" and 3/8")

3/8" Drive Set includes:

  • 1 -  1 1/2" extension
  • 1 -  3" extension
  • 1 -  5" extension
  • 1 -  Ratchet
  • 1 -  3/8" to 1/4" adapter
  • 1 -  Universal joint
  • 9 -  Sockets (5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4, and 13/16")
  • 8 -  Deep sockets (3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and 13/16")
  • 5 -  Universal sockets (3/8", 7/16", 1/2", 9/16", and 5/8")
  • 12 -  Metric deep sockets (8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM and 19MM)

1/2" Drive Set includes:

  • 1 - 6" extension
  • 1 - 10" extension
  • 1 - Ratchet
  • 1 - 18" Breaker bar
  • 1 - Universal joint
  • 15 - Sockets (5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16" and 1 1/4")
  • 11 - Deep sockets ( 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", and 1 1/8")

Misc Sockets

  • Torx Bits: T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55
  • Recess Torx: E4, E5, E6, E7, E8, E10, E12, E14, E16

Wrenches:

  • 12 - Combination wrenches 12 point (3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", and 1 1/8")
  • 1 - Combination metric wrenches 12 point (6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM, and 19MM)

Misc.: 

  • 1 - 16 piece Allen wrench set
  • 1 - 6" slip joint pliers
  • 1 - 10" slip joint pliers
  • 1 - 6" needle nose pliers
  • 1 - 7" diagonal cutters
  • 1 - Starter screw driver set
  • 1 - Starter punch and chisel set
  • 1 - 1/2" brass or bronze drift
  • 1 - 16 oz. Ball peen hammer
  • 1 - 40 oz. Ball peen hammer
  • 1 - digital multi-meter
  • 1 - continuity test light
  • 1 - Universal master feeler gauge
  • 1 - screw extractor set
  • 1 - 25' tape measure
  • 1 - 24" pry bar
  • 1 - scraper
  • 1 - battery brush
  • 1 - wire brush
  • 1 - 7" vise grips
  • 1 - 10" vise grips
  • 1 - tool chest (min. of 6 drawer)
  • 1 - rollaway tool cabnet (min. of 3 drawer)
  • 1 - solder gun
Twitter Facebook Youtube Foursquare

Supporting our Veterans